TomTom ONE 3rd Edition dmesg

From OpenTom

This is the kernel boot log for the various 3rd Edition kernels.

2.6.13-tt2332

Linux version 2.6.13-tt2332 (jore@adelaar.intra.local) (gcc version 3.3.4) #1 Wed Jan 9 09:42:09 CET 2008
CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ)
Machine: TomTom GO
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
CPU S3C2412 (id 0x32412000)
S3C2412: core 264.000 MHz, memory 132.000 MHz, peripheral 66.000 MHz
S3C24xx Clocks, (c) 2004 Simtec Electronics
Detected type 19, name TomTom ONE
On node 0 totalpages: 8192
DMA zone: 8192 pages, LIFO batch:3
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
CPU0: D VIVT write-back cache
CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists
Kernel command line: console=/dev/null quiet
irq: clearing pending ext status 00000001
irq: clearing subpending status 00000406
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 4096 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 32MB = 32MB total
Memory: 22600KB available (1816K code, 384K data, 84K init)
Calibrating delay loop... 131.48 BogoMIPS (lpj=328704)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
unpacking initramfs... done
Freeing initrd memory: 7168K
NET: Registered protocol family 16
S3C Power Management, (c) 2004 Simtec Electronics
S3C2412: Initialising architecture
S3C2412: IRQ Support
S3C2412: Clock Support, UPLL 96.000 MHz
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
S3C DMA Driver, (c) 2003-2004 Simtec Electronics
DMA channel 0 at c2800000, irq 33
DMA channel 1 at c2800040, irq 34
DMA channel 2 at c2800080, irq 35
DMA channel 3 at c28000c0, irq 36
ngffs: init_ngffs_fs: NGFFS initializing
TomTom GO Framebuffer Driver, (C) 2005 TomTom BV
ttgfb: ttgfb_alloc: Using LFB from bootloader (reserved memory).
S3C2410 RTC, (c) 2004 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
S3C2412 Watchdog Workaround, (c) 2006 TomTom
SI4710: si4710_init: ------------------si4710_init:result = 0x00---------------
TomTom GO Hardware Detection Driver, (C) 2004,2005 TomTom BV
TomTom GO ADC Driver, (C) 2004-2007 TomTom BV
TomTom GO GPIO Driver, (C) 2004,2005 TomTom BV
gpio_hw_init: UART 'ttySAC0' => 0
TomTom GO Accelerometer Driver, (C) 2004,2005 TomTom BV
Starting USB vbus probe (USB charge supported)
TomTom GO Battery Driver, (C) 2004,2005 TomTom BV
TomTom GO GPS Driver, (C) 2004,2005 TomTom BV
TomTom GO Backlight/Lightsensor Driver, (C) 2004,2005,2006 TomTom BV
TomTom GO Touchscreen Driver, (C) 2004,2005 TomTom BV
CoolSound engine, (C) 2004,2005 TomTom BV
dma2: IRQ with no loaded buffer?
CoolSound: sound_dma_init: Buffers allocated and associated.
iis2410: iis_init: Current clock rate: 66000000
iis-24nn
TomTom GO Buzzer Driver, (C) 2006 TomTom BV
TomTom GO Gyro Driver, (C) 2007 TomTom BV
Valencia/Murcia dock driver - v1.0
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2412
s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2412
s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2412
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 7168K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
TomTom GO IDE Driver, (C) 2004,2005 TomTom BV
physmap flash device: 80000 at 0
Found: EON EN29LV400BB
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
usbmon: debugfs is not available
Bluetooth: HCI USB driver ver 2.8
usbcore: registered new driver hci_usb
Bluetooth: HCI UART driver ver 2.1
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
s3c-sdi: probe: mapped sdi_base=f1200000 irq=83 irq_cd=18 dma=0.
s3c-sdi: initialization done.
NET: Registered protocol family 2
USB Host detected (USB charge supported)
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.4
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Freeing init memory: 84K
Warning: unable to open /dev/console as initial console, res=-19.
mmcblk0: mmc0:0001 000000 1003520KiB 
mmcblk0: unknown partition table
FAT: filesystem 32 bits
selected clock c01f7858 (pclk) quot 428, calc 9600
selected clock c01f7858 (pclk) quot 34, calc 115183